AdjustClutch

THREE POINT CLUTCH ADJUSTMENT

First pull back the boot at the handlebar clutch lever and loosen the lock wheel and turn the adjustment all the way in and lock. Then loosen the locknut at the other end of the cable where it goes into the front sprocket housing and turn the cable adjustment in to give more free play to unload the push road adjustment.

To adjust the clutch push rod free play remove the little cover on the front sprocket housing held on by 2 Phillips screws. Loosen the locknut with a 10 mm socket and back out the slotted adjustment screw it holds with a screwdriver a turn or two until it's free of the pushrod. Then while holding the locknut turn the screw back in until it contacts the rod and back out 1/4-1/2 turn to set free play and hold screw with screwdriver while locking down the locknut. I clamp vice grips on a deep 10 mm socket to tighten the locknut while holding the screw with the screwdriver inserted thru the socket.

Finally turn the clutch cable adjustment out of the housing to get proper clutch free play and tighten locknut. The clutch lever adjustment at the handlebar will then be available for future free play adjustments.

gsJack